Wastewater

  • Treatment Plants
  • Pump Stations
  • Overflow
YSI ProDSS Handheld Instrument

YSI ProDSS - Digital Sampling System

The YSI ProDSS (digital sampling system) handheld multiparameter meter provides extreme flexibility for the measurement of a variety of combinations for dissolved oxygen, turbidity, conductivity, specific conductance, salinity, resistivity, total dissolved solids (TDS), pH, ORP, pH/ORP combination, ammonium (ammonia), nitrate, chloride and temperature along with depth.

Aanderaa Aqua Optode 4531

Aanderaa Oxygen Optodes

The Oxygen optode is designed to measure absolute oxygen concentration and % saturation. The optode can be used from streams to deep sea, from fish farms to waste water and from polar ice areas to hydrothermal vents. The lifetime-based luminescence quenching principle offers the following benefits

Magflux Flow meter

MJK MagFlux® Flowmeters

MagFlux® Flowmeters are developed for measurements in all types of conductive liquids, including measurement of flow in drinking water, wastewater, sludge and process water. MagFlux Flowmeters are manufactured with carbon steel and stainless steel for flange or wafer connections and lining in hard or soft rubber and PTFE/PFA.

Shuttle® Ultrasonic Level Transmitter

MJK Shuttle® Ultrasonic Level Transmitter

With MJK cabled sensors, it is easy to position the transmitter with the display, where it can be useful, and the large display allows viewing from a distance. Tne one-step measurement start-up procedure is easy to follow and easy to modify the set-up of all functions, controls and signal management features. 

YSI ProSample Automated Sampler

YSI ProSample Automated Sampler

The NEW YSI ProSample series of fully automated portable samplers expand our process monitoring and control equipment offering. These lightweight and easy to use samplers come with a proprietary peristaltic pump for highly accurate sampling based on time, flow, or event. 

MJK 713 Flow Converter

MJK 713 Open Channel Flowmeter

MJK 713 Open Channel Flow Measurement and Regiatration of water Flow is a converter adaptable to many types of weirs and open channels.


The built-in ISO 1438 formulas for flow calculations are preprogrammed with the most common flumes and weirs such as Parshall, Venturi, Palmer-Bowles flumes and V-notch and rectangular weirs. Also to be used with non-standard channels and weirs, often installed at waste water plants and stormflow locations.

713 Open Channel Flowmeter is primarily used for measuring flow outlet from waste water treatment plants. The flow is calculated upon the water level, provided by either ultrasonic or hydrostatic level transmitter.

Built-in ISO 1438 formulas will provide the most common formulas, but it is possible to calculate flow from simple formula and level/flow linearization as well.

Built-in totalizer with non-resettable counter, and short term flow overview.

Easy to use and setup due to symbolic navigation buttons and multiple display languages.

MJK-hmi-touchscreen

MJK HMI Display

MJK HMI 7" Touchscreen Display is made to provide a clear communication and an easy overview at site.

The clear and graphical design save time and ease the pump maintains operation by providing all data by a touch. Adding an HMI Display to a pump station, the maintenance team will save time, and get better and clear information.

Designed for use with all types of water distribution pumps on the market.

MJK HMI has built-in data logger. All measured analogue values are presented as graphs, and can be turned on/off for easy comparison. The latest 8 active and inactive alarms can be seen and, if active, acknowledged in the alarm list.

Built-in pump maintenance/service interval feature by on-site resettable pump data plus many more functions are found in the intuitive graphical user interface.

 MJK Mµ Connect

MJK Mμ Connect® GSM/GPRS modem 6DI/2DO/3AI

MJK Mµ Connect is a combined pump controller and Remote Telemetric Unit (RTU) for smart monitoring and controlling of water pumps.

It includes advanced energy optimization, data collection and communication features that makes water management easier than ever.

Designed primarily for pumping stations and small water treatment plants, Mµ Connect controls pumps, measures and records overflow, controls and monitors filters, raw water pumps and booster pumps for water supply and much more by use of the standard build-in features.

Mµ Connect has build-in Wi-Fi and can be configurated either via a PC program Connect Link or controlled directly from a smartphone using MJK Connect App.

MJK pHix Compact

MJK pHix Compact

PH & REDOX MEASUREMENT


THE UNIQUE AND PRACTICAL DESIGN OF PHIX COMPACT ENABLES MEASUREMENT OF PH OR REDOX POTENTIAL FROM THE MEDIA IN WHICH IT IS SUBMERGED. 
The unique design of pHix Compact eliminates high impedance electrode connections and use of special hardware for mounting, and with the large surface of the pHix Compact reference junction the electrode is less sensitive to pollution.

All known issues such as corrosion, moisture and oxidation due to high impedance are practically eliminated with this construction.

This is one of the most user friendly pH transmitters on the market. The buffer adjustment of the pHix Compact is very easy to perform securing high repeatability.

Magflux Flow meter

MJK MagFlux® Flowmeters

MagFlux® Flowmeters are developed for measurements in all types of conductive liquids, including measurement of flow in drinking water, wastewater, sludge and process water. MagFlux Flowmeters are manufactured with carbon steel and stainless steel for flange or wafer connections and lining in hard or soft rubber and PTFE/PFA.

Shuttle® Ultrasonic Level Transmitter

MJK Shuttle® Ultrasonic Level Transmitter

With MJK cabled sensors, it is easy to position the transmitter with the display, where it can be useful, and the large display allows viewing from a distance. Tne one-step measurement start-up procedure is easy to follow and easy to modify the set-up of all functions, controls and signal management features. 

MJK Expert™ 367

MJK Expert™ Hydrostatic Level Series

MJK offers a full series of water level transmitters designed for immersion in open tanks, wet-wells, ground water and reservoirs. The water level transmitters are designed for measurement under rough conditions in all water and wastewater applications with large concentrations of sludge and suspended solids.

YSI ProSample Automated Sampler

YSI ProSample Automated Sampler

The NEW YSI ProSample series of fully automated portable samplers expand our process monitoring and control equipment offering. These lightweight and easy to use samplers come with a proprietary peristaltic pump for highly accurate sampling based on time, flow, or event. 

MJK-hmi-touchscreen

MJK HMI Display

MJK HMI 7" Touchscreen Display is made to provide a clear communication and an easy overview at site.

The clear and graphical design save time and ease the pump maintains operation by providing all data by a touch. Adding an HMI Display to a pump station, the maintenance team will save time, and get better and clear information.

Designed for use with all types of water distribution pumps on the market.

MJK HMI has built-in data logger. All measured analogue values are presented as graphs, and can be turned on/off for easy comparison. The latest 8 active and inactive alarms can be seen and, if active, acknowledged in the alarm list.

Built-in pump maintenance/service interval feature by on-site resettable pump data plus many more functions are found in the intuitive graphical user interface.

 MJK Mµ Connect

MJK Mμ Connect® GSM/GPRS modem 6DI/2DO/3AI

MJK Mµ Connect is a combined pump controller and Remote Telemetric Unit (RTU) for smart monitoring and controlling of water pumps.

It includes advanced energy optimization, data collection and communication features that makes water management easier than ever.

Designed primarily for pumping stations and small water treatment plants, Mµ Connect controls pumps, measures and records overflow, controls and monitors filters, raw water pumps and booster pumps for water supply and much more by use of the standard build-in features.

Mµ Connect has build-in Wi-Fi and can be configurated either via a PC program Connect Link or controlled directly from a smartphone using MJK Connect App.

YSI ProDSS Handheld Instrument

YSI ProDSS - Digital Sampling System

The YSI ProDSS (digital sampling system) handheld multiparameter meter provides extreme flexibility for the measurement of a variety of combinations for dissolved oxygen, turbidity, conductivity, specific conductance, salinity, resistivity, total dissolved solids (TDS), pH, ORP, pH/ORP combination, ammonium (ammonia), nitrate, chloride and temperature along with depth.

SonTek FlowTracker2

SonTek FlowTracker2® Handheld-ADV®

The new FlowTracker2 (FT2) handheld Acoustic Doppler Velocimeter (ADV®) has all the technology you have grown to know and trust with the original FlowTracker, but now comes with functional, modernized features (Bluetooth, GPS and large color screen, to name only a few) based on the evaluation and feedback from hydrologists, researchers and scientists who have made the FlowTracker their instrument of choice.

Storm 3 Datalogger

YSI WaterLOG Storm 3 Datalogger

The Storm 3 Data Logger incorporates a balanced set of inputs for analog, digital I/O and SDI-12 smart sensors to allow communication through cellular modems and GOES satellite. You'll love how easy it is to configure and collect data using the browser-based graphical user interface (GUI) with all standard web browsers on PCs, tablets and smart phones.

Magflux Flow meter

MJK MagFlux® Flowmeters

MagFlux® Flowmeters are developed for measurements in all types of conductive liquids, including measurement of flow in drinking water, wastewater, sludge and process water. MagFlux Flowmeters are manufactured with carbon steel and stainless steel for flange or wafer connections and lining in hard or soft rubber and PTFE/PFA.

SonTek-IQ® Series

SonTek-IQ® Series

Ideal for monitoring flows in canals, culverts, pipes, and natural streams, the SonTek-IQ starts with a custom flow algorithm derived from hundreds of field measurements. Four velocity beams profile water velocity in 3-D - both vertically and horizontally - ensuring complete coverage of the velocity field. The built-in pressure sensor and vertical acoustic beam work in tandem to measure water level. Simply input the channel geometry using the intuitive SonTek-IQ software and you are outputting flow data in minutes.

YSI ProSample Automated Sampler

YSI ProSample Automated Sampler

The NEW YSI ProSample series of fully automated portable samplers expand our process monitoring and control equipment offering. These lightweight and easy to use samplers come with a proprietary peristaltic pump for highly accurate sampling based on time, flow, or event. 

MJK 713 Flow Converter

MJK 713 Open Channel Flowmeter

MJK 713 Open Channel Flow Measurement and Regiatration of water Flow is a converter adaptable to many types of weirs and open channels.


The built-in ISO 1438 formulas for flow calculations are preprogrammed with the most common flumes and weirs such as Parshall, Venturi, Palmer-Bowles flumes and V-notch and rectangular weirs. Also to be used with non-standard channels and weirs, often installed at waste water plants and stormflow locations.

713 Open Channel Flowmeter is primarily used for measuring flow outlet from waste water treatment plants. The flow is calculated upon the water level, provided by either ultrasonic or hydrostatic level transmitter.

Built-in ISO 1438 formulas will provide the most common formulas, but it is possible to calculate flow from simple formula and level/flow linearization as well.

Built-in totalizer with non-resettable counter, and short term flow overview.

Easy to use and setup due to symbolic navigation buttons and multiple display languages.

MJK chatter-lock

MJK Chatter Datalogger

LOGGING DATA TODAY IS NOT JUST PROCESSING DATA SUCH AS OXYGEN, PH OR LEVELS. WE MEASURE AND LOG DATA FROM RESERVOIRS, LAKES, RIVERS, STREAMS, CREEKS, GROUNDWATER, SURFACE WATER, HARBORS AND MANY OTHER PLACES TO HELP ADAPT AND IMPROVE OUR INFRA STRUCTURE.
Logging data far away from urban areas is handled by a battery powered datalogger, that gather information and send the information to a SCADA system, dedicated databases or even as e-mails when its suitable to do so.

Publicly placed dataloggers are vandal protected, and will send a warning when intruders act.

Sending data once a day will provide at battery life time of up to 5 years.

Information on ground water levels and early warning sewer systems in correlation with buildings nearby urban construction can save millions of Euros in damage.